ISRI code TWIST shall consist of clean Aluminum Castings from Airplanes and to be free from iron, dirt, brass, bushings, and non-metallic items. Oil and grease in Aluminum Airplane Castings Read more
ISRI code TWIRE Fragmentizer Aluminum Scrap derived from incinerated or burned material (Automobile Aluminum Scrap) must be dry and not contain more than X% (% to be agreed upon by buyer and Read more
ISRI code TWEAK contains Fragmentizer Aluminum Scrap derived from either mechanical or hand separation, the Tweak Aluminum Scrap must be dry and not contain more than 4% maximum free zinc, 1% Read more
ISRI code TWITCH consist of Floated Fragmentizer Aluminum Scrap derived from wet or dry media separation device, the Twitch Aluminum Scrap must be dry and not contain more than 1% maximum Read more
ISRI Code TWANG consists of Insulated Aluminum Wire Scrap, which may or may not contain other wires or metal shielding, with the expected aluminum recovery agreed upon by the buyer and the Read more
ISRI Code TRILL shall consist of Aluminum Conductor Steel Reinforced (ACSR) Wire Scrap, a combination of steel and aluminum wire, of various configurations, with the expected aluminum Read more
ISRI Code TREAD shall consist of new, clean, uncoated Aluminum Castings, Forgings, and Extrusions of one specified alloy only and to be free from sawings, stainless steel, zinc, iron, dirt, Read more
ISRI Code TRUMP shall consist of all clean Automobile Aluminum Castings Scrap of sufficient size to be readily identified and free from iron, dirt, brass, bushings, and non-metallic items. Read more
ISRI Code TOUGH is considered as high paying grades of Aluminum Scrap and shall consist of new, clean, uncoated, unpainted Aluminum Clippings and Solids of two or more alloys with a minimum Read more
ISRI Code TOOTH shall consist of new, clean, uncoated, unpainted Aluminum Clippings and Solids of one specified aluminum alloy with a minimum thickness of .015” (.38 mm) and to be free Read more
ISRI Code THIGH shall consist of miscellaneous Aluminum-containing grindings. Aluminum Grindings should be sold on recovery basis or by special arrangements with purchaser. ISRI Read more
ISRI Code THIRL shall consist of Aluminum Drosses, Spatters, Spillings, Skimmings and Sweepings. Aluminum Drosses should be sold on recovery basis or by special arrangements with Read more
Page 2 of 15